Juniper
Juniper 100GBASE-PSM4 QSFP28 Transceiver Module, 500 m Parallel Single-Mode MPO-12 (APC)
JNP-QSFP-100G-PSM4
Price on request
Conditions: New · Refurbished
Illustration
Juniper
EX-SFP-10GE-SR
Photo on request
Juniper
Juniper 10GBASE-SR SFP+ Transceiver Module, 850 nm Multimode
MPNEX-SFP-10GE-SR
Also known as SFPP-10G-SR-C, QFX-SFP-10GE-SR, 740-021308
The Juniper EX-SFP-10GE-SR is a 10GBASE-SR SFP+ transceiver with a duplex LC connector for 850 nm multimode fiber, rated for 300 m.
Available on requestLead time confirmed in your quote
Price on request
Pricing reply within 1 business day
- Ships worldwide
- 1 year warranty
- Reply in 1 business day
- Card, PayPal, wire
Request Pricing
Tell us what you need. No payment, no obligation. Pricing reply within 1 business day.
Juniper 10GBASE-SR SFP+ Transceiver Module, 850 nm Multimode
EX-SFP-10GE-SR · Refurbished · 1 year warranty
Quantity (units)
Overview
Short-reach 10GbE over multimode fiber is the job of the Juniper 10GBASE-SR SFP+ Transceiver Module, part number EX-SFP-10GE-SR. It transmits at 850 nm, uses a duplex LC connector and has a rated reach of 300 m.
The part number is what a switch looks up when it checks its supported-optics list, so match the number your platform expects.
Typical use is an uplink between an access switch and a distribution layer, or a server connection in a closet. Duplex LC multimode cabling is the most common type installed, so the module generally drops into an existing plant.
The form factor is SFP+. It fits 10GbE cages and not QSFP ports. Both ends of the link need a short-reach module, and the fiber must be multimode.
Measure the cable run to be sure it falls under 300 m. Confirm the fiber grade you have installed against the reach figure.
The EX-SFP-10GE-SR is offered in new, refurbished and used condition. New and refurbished modules carry 1 year or 3 years of warranty, and used modules carry 90 days. Send your quantity and platform for pricing.
Specifications
| Manufacturer part number | EX-SFP-10GE-SR |
|---|---|
| Brand | Juniper |
| Media | Multimode fiber |
| Ports | 1 |
| Maximum reach | 300 m |
| Connector | LC |
| Port speed | 10GbE |
| Reach note | 300 m on 50 micron multimode fiber; 33 m on 62.5 micron multimode fiber |
| Form factor | SFP+ |
| Type | Transceiver |
| Wavelength | 850 nm |
Specifications from the manufacturer's datasheet ↗
Alternative part numbers
Other numbers for EX-SFP-10GE-SR, as printed on labels, spare-parts lists and manufacturer documents. Search works with any of them.
| Part number | Type | Brand | Note |
|---|---|---|---|
| SFPP-10G-SR-C | Equivalent | Same brand | Juniper common-optics SKU, Juniper part number 740-021308, HCT names it the common equivalent of EX-SFP-10GE-SR and QFX-SFP-10GE-SRQuote this part number |
| QFX-SFP-10GE-SR | Equivalent | Same brand | Juniper SKU for QFX platforms; Juniper HCT lists the same module part number 740-021308 for both SKUsQuote this part number |
| 740-021308 | Alternative | Same brand | Juniper module part numberQuote this part number |
FAQ
- What reach does the EX-SFP-10GE-SR support?
- 300 m over multimode fiber.
- What wavelength and connector?
- 850 nm with a duplex LC connector.
- What form factor is it?
- SFP+.
- Which conditions are available?
- New, refurbished and used.
- What warranty applies to used modules?
- 90 days.
Can't find the exact part?
Send us the part number. We search our supplier network for new, refurbished and used stock and reply within 1 business day.